"Set-Your-Own" Combination Locks Instructions FAQs

Please follow the steps outlined below: 

1. This lock is preset to operate at 0-0-0-0.
2. To set your own combination, dial the combination wheels to 0-0-0-0 and withdraw the lock.
3. Turn the knob 90 degrees in a clockwise direction to the designated position.
4. Now set your own combination, make sure the numbers are lined up with the marks.
5. Once you have selected your combination numbers, turn the knob back to the original position in a counterclockwise direction.
6. The reset operation is now complete.

Please follow the steps outlined below: 

1. This lock is preset to operate at 0-0-0-0.
2. To set your own combination, dial the combination wheels to 0-0-0-0 and withdraw the lock.
3. Turn the knob 90 degrees in a clockwise direction to the designated position.
4. Now set your own combination, make sure the numbers are lined up with the marks.
5. Once you have selected your combination numbers, turn the knob back to the original position in a counterclockwise direction.
6. The reset operation is now complete.

To change the factory combination:

1. Set the combination wheels to 0-0-0-0 and push the ‘reset’ button located on the reverse of the base.
2. Reset the combination wheels to the desired combination making sure the numbers are lined up with the delta marks.
3. Then press the release button situated on the left, the new combination is now set.

If it still not working, please specify the step you are stuck.